Ultimate Gaming

Loading

Anycubic PLA Silk Tri-colour Filament 1kg – Red/Blue/Yellow
Anycubic PLA Silk Tri-colour Filament 1kg – Red/Blue/Yellow - Image 2
Anycubic PLA Silk Tri-colour Filament 1kg – Red/Blue/Yellow - Image 3

Anycubic PLA Silk Tri-colour Filament 1kg – Red/Blue/Yellow

R449,00 VAT inc

4 in stock

SKU: AHSC18-10 Categories: , , Brand:

Description

Tri-colour silk gradient in one spool | Silky lustrous finish | Compatible with 0.4 mm nozzles and above | Print speeds up to 250 mm/s | Supports intelligent filament identification

The Anycubic PLA Silk Tri-colour Filament in Red, Blue, and Yellow is designed for makers who want to elevate decorative prints, fan art, and artistic models beyond single-colour results. Three colours are blended into a single 1 kg spool, producing smooth gradient transitions and a silk-like lustrous finish that shifts visually as the model is rotated. You can fine-tune the surface gloss by adjusting nozzle temperature and print speed — a higher temperature or slower speed increases fluidity and produces a higher-gloss, smoother surface, while cooler or faster settings give a subtler sheen. Compatible with any FDM printer that accepts 1.75 mm filament and a nozzle of 0.4 mm or above, it runs at printing temperatures of 210–240 °C, a heated bed of 55–56 °C, and recommended speeds of 50–250 mm/s. On compatible Anycubic printers the intelligent identification chip is read automatically, streamlining setup without any manual input. A reliable, visually striking choice for decorative and display-quality 3D prints.

Features

  • Tri-colour gradient (Red, Blue, Yellow) blended in a single 1 kg spool for layered, multi-tone prints
  • Silk-like lustrous finish that shifts appearance with viewing angle
  • Adjustable gloss — tune nozzle temperature (210–240 °C) and print speed (50–250 mm/s) to control surface sheen
  • Compatible with all 1.75 mm FDM printers using a 0.4 mm or larger nozzle
  • Intelligent identification chip for automatic filament recognition on compatible Anycubic printers
  • Suited to decorative parts, fan art, figurines, and display models

Specifications

  • Colour: Red Blue Yellow (#003594,#F3D03E,#D22630)
  • Dry Out Before Use: Recommended
  • Drying Condition: 55-65℃, 6-8h
  • ACE Compatibility: Compatible
  • Nozzle Size: Recommended 0.4 mm or above
  • Printing Temperature: 210-240 ℃
  • Heated Bed Temperature: 55-56 ℃
  • Recommended Printing Speed: 50-250 mm/s
  • Maximum Volume Speed (Flow Rate): 8 mm³/s
  • Density: 1.22 g/cm³
  • Melt Index: 9±1 g/10 min (190℃/2.16kg)
  • Melting Point Temperature: 164 ℃
  • Vicat Softening Temperature: 54 ℃
  • Heat Deflection Temperature (0.45MPa): 53 ℃
  • Young’s Modulus: 2000±200 MPa
  • Tensile Strength: 37±4 MPa
  • Elongation at Break: 28±5%
  • Bending Modulus: 2400±160 MPa
  • Bending Strength: 66±4 MPa
  • lzod lmpact Strength (X-Y): 20±2 kJ/m²
  • Tensile Strength (Z): 12±4 MPa
  • Filament Type: Aesthetic filaments
  • Recommend to Print: Decorative parts, fandom, artworks
  • Intelligent Identification: Supported
  • Reusable Filament Spool: Supported
  • Size: 1KG

What’s in the Box

  • Anycubic PLA Silk Tri-colour Filament 1kg – Red/Blue/Yellow x1

Additional information

Weight 1390 g
Dimensions 46 × 44 × 22 cm

Reviews

There are no reviews yet.

Be the first to review “Anycubic PLA Silk Tri-colour Filament 1kg – Red/Blue/Yellow”

Your email address will not be published. Required fields are marked *

Related products