Anycubic PLA Silk Dual Filament 1kg – Red/Blue

Description

Silk-gloss dual-colour PLA filament | Gradient colour shifting in a single pass | Adjustable luster via temperature and speed | 1 kg per roll | Compatible with all 1.75 mm FDM printers

The Anycubic PLA Silk Dual Filament in Red/Blue is designed for makers who want visually striking, multi-toned prints without the complexity of a multi-extruder setup. The dual-colour construction produces a rich gradient effect that shifts across the model’s surface as each layer is laid down, delivering a premium silk-like luster that catches the eye from any angle. You can fine-tune the finish by adjusting nozzle temperature and print speed — a higher temperature or slower speed produces a smoother, higher-gloss surface, giving you direct control over the final look. Compatible with any FDM printer that accepts 1.75 mm filament, it prints at a nozzle temperature of 210–240 °C with a heated bed at 55–56 °C and supports speeds from 50 to 250 mm/s. Each roll weighs 1 kg and is rated for decorative parts, fan art, and artistic models where appearance is the priority.

Features

• Dual-colour construction produces a seamless gradient effect across printed surfaces in a single pass
• Silk-like luster that shifts and deepens when the model is rotated, adding visual depth and a premium feel
• Adjustable finish — increase nozzle temperature or reduce print speed for a higher-gloss, smoother surface
• Compatible with all 1.75 mm FDM printers; no multi-extruder setup required
• Supports Anycubic ACE Pro intelligent identification for automatic filament recognition (internet connection required)
• Reusable spool with threaded locking system reduces entanglement and filament scatter
• Certified to RoHS, REACH, and SDS standards

Specifications

• Colour: Red Blue (#E63888,#003594)
• Dry Out Before Use: Recommended
• Drying Condition: 55-65℃, 6-8h
• ACE Compatibility: Compatible
• Nozzle Size: Recommended 0.4 mm or above
• Printing Temperature: 210-240 ℃
• Heated Bed Temperature: 55-56 ℃
• Recommended Printing Speed: 50-250 mm/s
• Maximum Volume Speed (Flow Rate): 8 mm³/s
• Density: 1.22 g/cm³
• Melt Index: 9±1 g/10 min (190℃/2.16kg)
• Melting Point Temperature: 164 ℃
• Vicat Softening Temperature: 54 ℃
• Heat Deflection Temperature (0.45MPa): 53 ℃
• Young’s Modulus: 2000±200 MPa
• Tensile Strength: 37±4 MPa
• Elongation at Break: 28±5%
• Bending Modulus: 2400±160 MPa
• Bending Strength: 66±4 MPa
• lzod lmpact Strength (X-Y): 20±2 kJ/m²
• Tensile Strength (Z): 12±4 MPa
• Filament Type: Aesthetic filaments
• Recommend to Print: Decorative parts, fandom, artworks
• Intelligent Identification: Supported
• Reusable Filament Spool: Supported
• Size: 1KG

What’s in the Box

• Anycubic PLA Silk Dual Filament 1kg – Red/Blue x1