Ultimate Gaming

Loading

Anycubic PLA Silk Dual Filament 1kg – Black/Red
Anycubic PLA Silk Dual Filament 1kg – Black/Red - Image 2
Anycubic PLA Silk Dual Filament 1kg – Black/Red - Image 3

Anycubic PLA Silk Dual Filament 1kg – Black/Red

R449,00 VAT inc

1 in stock

SKU: AHSC17-10 Categories: , , Brand:

Description

Dual-colour silk luster in one spool | Smooth gradient finish straight off the printer | Compatible with all 1.75 mm FDM printers | Adjustable gloss via nozzle temperature and speed | Designed for decorative prints and artistic models

The Anycubic PLA Silk Dual Filament in Black/Red is designed for makers who want their prints to stand out with a rich, layered visual effect without any post-processing. The dual-colour silk formula blends black and red into a seamless gradient that shifts and catches the light as the model rotates, giving finished pieces a premium, almost metallic sheen. You can fine-tune the surface finish simply by adjusting your nozzle temperature and print speed — a higher temperature or slower speed increases filament fluidity for a high-gloss, silky surface, while cooler, faster settings yield a softer lustre. The filament is compatible with any 1.75 mm FDM printer and works at a printing temperature of 210–240 °C with a heated bed set to 55–56 °C and a recommended print speed of 50–250 mm/s. Dry the spool at 55–65 °C for 6–8 hours before use to ensure clean, consistent extrusion. Ideal for decorative parts, fan art, and artistic models where visual impact matters.

Features

  • Dual-colour silk PLA combines Black (#212721) and Red (#D22630) in a single strand for eye-catching gradient prints
  • Silk-like surface luster shifts across the colour spectrum as the model is rotated, adding depth and a premium finish
  • Controllable gloss — adjust nozzle temperature and print speed to dial in high-gloss or softer lustre results
  • Compatible with all 1.75 mm FDM printers; no specialist hardware required
  • Supports intelligent identification when used with compatible Anycubic ACE Pro systems for automatic print-parameter recognition
  • Certified to RoHS, REACH, and SDS standards
  • Recommended for decorative parts, fandom models, and artistic prints

Specifications

  • Colour: Black Red (#212721,#D22630)
  • Dry Out Before Use: Recommended
  • Drying Condition: 55-65℃, 6-8h
  • ACE Compatibility: Compatible
  • Nozzle Size: Recommended 0.4 mm or above
  • Printing Temperature: 210-240 ℃
  • Heated Bed Temperature: 55-56 ℃
  • Recommended Printing Speed: 50-250 mm/s
  • Maximum Volume Speed (Flow Rate): 8 mm³/s
  • Density: 1.22 g/cm³
  • Melt Index: 9±1 g/10 min (190℃/2.16kg)
  • Melting Point Temperature: 164 ℃
  • Vicat Softening Temperature: 54 ℃
  • Heat Deflection Temperature (0.45MPa): 53 ℃
  • Young’s Modulus: 2000±200 MPa
  • Tensile Strength: 37±4 MPa
  • Elongation at Break: 28±5%
  • Bending Modulus: 2400±160 MPa
  • Bending Strength: 66±4 MPa
  • lzod lmpact Strength (X-Y): 20±2 kJ/m²
  • Tensile Strength (Z): 12±4 MPa
  • Filament Type: Aesthetic filaments
  • Recommend to Print: Decorative parts, fandom, artworks
  • Intelligent Identification: Supported
  • Reusable Filament Spool: Supported
  • Size: 1KG

What’s in the Box

  • Anycubic PLA Silk Dual Filament 1kg – Black/Red x1

Additional information

Weight 1390 g
Dimensions 46 × 44 × 22 cm

Reviews

There are no reviews yet.

Be the first to review “Anycubic PLA Silk Dual Filament 1kg – Black/Red”

Your email address will not be published. Required fields are marked *

Related products